Remote Head Siren -100 Watt Single Tone, or 200 Watt Dual Tone

The SoundOff nERGY 400 Series Control Panel Remote Siren is highly programmable, and includes 12 switched high current power outputs for powering a wide variety of other equipment. This siren features eight auxiliary buttons for one-touch programming, and a three position slide switch to allow convenient switching for the most frequently used warning modes. The power control features provide up to nine 10 amp and three 20 amp outputs with internal fuses for powering solenoids (i.e. gunlock) or supplying power and signaling to other onboard peripherals (printer, radar, GPS, etc.). The remote control switch panel may be console mounted or attached with included universal bail bracket, while the amplifier can be mounted in a remote location such as the trunk. All SoundOff nErgy 400 Series Sirens include built-in protection against over/under voltage, short circuit and reverse polarity.

This is a Special Order item. Special order items are non-cancelable, non-returnable, and non-refundable.

All sales for special order items are final.

Features:

• Eight auxiliary buttons for one-touch programming of siren functions.
• One three-position slide switch to allow convenient switching for the most frequently used warning modes.
• New switch panel graphics integrate with the interiors of newly designed vehicles.
• Eight-second buzzer alert to notify users that the slide switch or auxiliary buttons are activated.
• Horn ring scroll provides ability to quickly change tones with the tap of the horn.
• Provides up to nine 10 amp and three 20 amp outputs with internal fuses for powering a wide variety of other equipment.
• Remote switch panel may be console mounted or attached with included universal bail bracket.
• Amplifier can be mounted in a remote location such as the trunk.
• Cabling setup is the same as 380 Siren Series allowing for easy swap-in.
• Dimmable green LED backlighting.
• Park-Kill function included.
• 100 watt single speaker output standard.
• 200 watt dual speaker, dual-tone optional.

Specifications:

• Audio Output: 1 Channel @ 100 Watts (2 Channels @ 200 Watts Optional).
• Certifications: SAE J1849 and CA Title 13 (when configured properly).
• Operating Voltage: 10 - 16 VDC (Negative Ground).
• Operating temperature: 40°C to +50°C
• Dimensions Control Head: 6.875" W x 3.5" H x 1.125" D.
• Dimensions Amplifier: 7.0" W x 6.375" D x 2.625" H.